Comments on: Step by step guide for DIY window tinting?

By: Weight Loss Success

Weight Loss Success — Sun, 08 Mar 2009 22:49:27 +0000

Hello,
Nice blog, I just stumbled on it and I’m already a dedicated reader
I recently shed 30 pounds in 30 days, and I want to discuss my weight loss success
with your readers. I described my experience
on my blog, and I would appreciate your comments!

If I can lose that much weight then any one can. Whatever you do, don’t give up and you WILL
achieve all your weight loss goals!
much thanks for reading,
Joan
Latest blog post: on the lemondae diet

By: DA

DA — Wed, 04 Mar 2009 20:32:23 +0000

Following the directions on the box is usually the thing that people ***** up.

The windows have to be clean. I don’t mean “I can’t see any dirt on it clean”. I mean clean like “Birds are going to fly through it clean”. Use a razor, use ammonia, use your brother, but get it clean.

Pre-size your cuts on the outside of the car so they’re manageable.

Apply the tint inside the garage. You need light, but not direct sunlight. It heats up the windows and you’ll get bubbles.

Don’t rush. You get more than one shot when putting it on. The more time you spend getting it right, the longer it will last. Keep it moist with the soap solution.

By: Daniel M

Daniel M — Tue, 03 Mar 2009 17:40:42 +0000

I dont really reccommend doing it yourself, most DIY tints dont have a life longer than 2 years because they wont guarantee it, as it isnt being installed by a professional, i suggest getting it done by a professional with metal tint that has a life of 5-10 years

By: fiestyredhead

fiestyredhead — Sat, 28 Feb 2009 05:55:51 +0000

There should be instructions with the ‘tint’. My advice to you is to do it when you are in the mood. Don’t try to get it done in a hurry. And if you start to feel aggervated…stop. It is a project to be done when you aren’t pressed for time. And when you feel like spending the time doing it. Otherwise it’ll come out looking like crap.